Floating Boat Lifts for small vessels and recreation crafts

boat lift 2 ton boat lift 3 ton

We are proudly to present an innovative solution for the European boat market that will allow you to operate and store a motor yacht, boat or jet ski with a whole new level of convenience and comfort - the pneumatic lift for a boats, motor yachts or jet ski. Using a floating boat lift helps avoids prolonged contact of the hull with water, which significantly extends the life of the boat and simplifies its maintenance. With the floating boat lift, the boat with weight up to 10 tons can be stored on the lift in a raised state and therefore you dont need to pull him ashore or rent a place in a specialized parking lot. Storing the motorcraft on a lift can reduce the risk of damage to the ship and berth during strong winds and storms. The boat lift will also be an ideal solution for winter storage of the vessel, avoiding damage to the hull of the boat with ice or osmosis.

Boat Lift 1 ton

small boat lift

Length: 6.0 m Width 2.5m Pipe:400 mms Pipe thickness: 15 mms Weight 700 kgs Kompressor: 0.5 m3/min 12 VDC

Price 3000 EUR

Boat Lift 3 ton

boat lift 3 tons

Length: 6.0 m Width 2.5m Pipe:600 mms Pipe thickness: 15 mms Weight 1000 kgs Kompressor: 2x0.5 m3/min 12 VDC

Price 4000 EUR

Boat Lift 5 ton

floating lift 5 tons

Length: 6.0 m Width 2.5m Pipe:800 mms Pipe thickness: 20 mms Weight 1500 kgs Kompressor: 2x2.0 m3/min 220 AC

Price 5000 EUR

Custom

custom boat lift

Length: 9-12.0 m Width 2-4.5m Pipe:800-1000 mms Pipe thickness: 20 mms Kompressor: 220 AC Options: deck, rails, 12DC, canopy

From 1 Euro / Kg

Models and size

The design of the boat lifts is calculated individually depending on boat weight and dimensions, but for most cases we offer standart models line - 3 - 5- 8 and 10 ton models, fit for 90% of standart plastic motorcrafts. If boat have individual type of hull - we can build boat lift for this model individually with no extra charge - just provide us vessel dimensions and weight. The fundamental difference between a boat lift and other types of equipment is the principles of its operation, therefore HDPE plastic is used in the design of air-powered boat lifts, therefore all the operating mechanisms of the lifts are made in completely non-corrode HDPE. The use of a boat elevator does not require special skills, therefore it is quite possible for an inexperienced person to lift up and launch a boat. By installing an boat lift, you will make your boats operation mooring much more comfortable and simple, and, importantly, you can save a lot of time and money in maintaining and storing your boat. The boat lift design eliminates complex blocks that require special care or adjustment - all powered and controlled by air compressor on board - and has no friction units during operation - only filling with air, which cannot break or fail during operation.

Advantages

The main advantage of floating boat lift is a money. Buying a boat lift owner of boat win a thousands euro in next years - avoiding lifting up boat for regular bottom cleaning, keeping vessel in new condition and any problems with osmosis. Your boat condition will exactly same as when you see her for first time - no rust on shafts and props, no plastic damages from waner or shells. Allways high boat speed and good fuel economy with clean bottom, avoiding any wearing and increasing the reliability of boats by storing them above water and in the dry state - Lower maintenance costs by any boat works and service directly on floating lift deck - Boat hull, gears and propellers of the boat are always kept in good working order. - Mooring in marina of boats becomes safer and easier, lauch is simply and faster - The boat lift stabilizes and keeps the boat in the conditions of waves - Safe parking without helpers, fenders and mooring lines - Dry boat storage anytime for 99 percents of time, no any rust - Floatig lift can be used in any place where you store the boat: in marinas or near your house - Boat lift pneumatic system is powered by boat batteries on a board or from AC power - Floatig lift is easy to dismantle and can be moved to a new location, or lift up to a shore.

boat lift 3 ton boat lift 5 ton

How boat lift works

Air-powered Float Boat Lift is the leader among the lifting and parking devices for small boats. Floating pontoon boat lift simply attaches to a dock or pier - revolutionary Float Lift design allows for use in shallow water.   You Win :

High speed of raising and lowering the boat
Unsinkable, castle in the air, remote control
Design to prevent accidental lowering of the boat.
tipa alt

Lift construction

The construction of a floating lift for boats is simple and reliable - it is a submersible platform made of HDPE pipes, complemented by air compressor for pumping air and a system of bypass air valves. When the boat enters the lift, the owner presses the compressor start button, and air at a pressure of 0.2-0.3 kg / cm2 is supplied to the float system in minutes. When ballons filled with air, the elevator floats up, and lifting the boat on a self-centering steel frame from the longitudinal holders of the boat. In this position, the elevator can stay as long as it is required for the owner. When launching, just open the drain valve and release the air from the elevator cylinders - the elevator will gently lower the boat into the water, after which the boat will be able to leave the parking lot. The lift can be raised again or left in a flooded position.

boat lift 5 ton boat lift 3 ton

Air-powered Float Boat Lift is the leader among the lifting and parking devices for small boats. Floating pontoon boat lift simply attaches to a dock or pier - revolutionary Float Lift design allows for use in shallow water.
Distinctive features of the Float Boat Lift:
High speed of raising and lowering the boat
Unsinkable, castle in the air, remote control
Design to prevent accidental lowering of the boat.
The compressor is battery, solar or AC powered.

Stationary storage

Boat lifts matters for a watercraft, regardless of location, boat size and water body where it is used. In any situation, a floating lift helps in determining the longevity of your boat. Keeping the boat in the water may seem like a good idea, but over time, it can wear down the yacht and deteriorate the hull of the boat. Algae can also attack the underside of the boat to create plaque. With a floating boat lift, you don't have to worry about cleaning the hull of the boat, it will help maintain the appearance of the boat and save money for a long time, as well as reduce the cost of maintaining and repairing the boat.
Storing your boat in water may cause potential damage by water fluctuations due to storms as well as changes in weather conditions. Floating boat lift helps to stabilize fluctuations caused by different water levels, which ensures the safety of the vessel. In addition to protecting against fouling, corrosion and damage, a floating lift will help save time when launching and retrieving a motorcraft boat.


boat lifting for winter boat on lift

Storing your boat in water may cause potential damage by water fluctuations due to storms as well as changes in weather conditions. Floating boat lift helps to stabilize fluctuations caused by different water levels, which ensures the safety of the vessel. In addition to protecting against fouling, corrosion and damage, a floating lift will help save time when launching and retrieving a motorcraft boat.

Projects

In 2015-2020, www.floatboatlift.com built and commissioned 34 new pontoons of various types with a total deadweight of 195 tons. In March 2020, www.floatboatlift.com 5th anniversary. For 2022, 42 elevators and pontoons were built. During its existence, www.floatboatlift.com has gone from a small company dealing exclusively with calculation tasks to an organization that performs almost the entire range of work for the construction of pontoons and floating lifts.

boat lift draco 1

Standard Models

boat lift draco 2

Floatboatlift offers floating lifts of various carrying capacities for boats, yachts, jet skis and other watercraft. Our floating boat lifts will provide you with a high level of convenience and comfort during the operation and storage of boats and yachts. We offer several standard models of different sizes of floating lifts for watercraft, differing in capacity and size:

Summary

A new technical solution - a combination of ballast tanks made of HDPE polyethylene and the use of a air compressors, provides ascent to a pontoon floating module with a boat on it. The boat lift (air compressed floating dock) uses ballast tanks made of UV and frost resistant HDPE. The boat rises above the water level due to the displacement of water from the hdpe floats when blowing with compressed air and the reverse process - when filling the floats with water under the weight of the boat, like a submarine.
Appointment: for daily and winter storage and maintenance of boats in a water position. Prevents pollution, osmosis, electrochemical corrosion, mechanical damage on the mooring structure of the boat hull during parking. Duration of ascent / immersion - from 2 to 5 minutes (depends on the volume of tanks and the number of compressors) Possible lifting weight of the boat is up to 10 tons. An individual project for each ship or standart universal type for boat bases and marinas - for rent or lease service. HDPE boat lift is the perfect environmentally friendly solution. The hdpe boat lift is used even on the shallow coasts, and in the event of a storm they can be quickly dismantled or pulled ashore or transported to a new location. We offer boat lifts as a completed set, and disaccembled kits fit for transportation by car or containers, and mounting in any place.
Pneumatic boat lifts made of HDPE and PVC for boats are designed for safe and careful storage of small watercrafts weighing from 1 to 10 tons in mooring areas above the water (completely removed from the water). The essence of the innovative technical solution is a combination of HDPE and steel, environmentally friendly , technological materials and Archimedes' law, providing variable buoyancy of a float structure with a boat installed on it:when ascending, water is displaced from the floats as a result of blowing them with compressed air, and the reverse process of immersion is due to filling the floats with water. If you have been the owner of a boat or boat for a long time, but you moor as you have to and, finally, are still thinking about more delicate preservation of your property, if you are interested in using the lift, make an order and we will select a lift that will match your boat.
The use of a lifting mechanism for storing a vessel significantly extends its service life, preventing electrochemical corrosion. Also, this storage method helps to reduce the cost of maintenance of the case, maintaining the speed characteristics of a clean case. Winter storage becomes easy and safe. Advantages: Small mooring space; Possibility of accommodation away from the coast; Easy deployment; The ability to move floating lift to another location without deployment; Remote control; Possibility of installing a canopy. Air-powered HDPE boat lift is ideal solution for yachts, boats up to 10 tons.